【Geared motor】What are the excellent characteristics of gear motors?

   
Geared motor refers to the integration of reducer and motor (motor). This type of integration is also commonly referred to as a gear motor or gear motor. Usually by a professional reducer manufacturer, after the integration and assembly, it is supplied as a complete set with the motor. Because the overall use effect of the gear motor is still okay, the gear motor itself has many characteristics, and these different characteristics also determine the use of the gear motor to a certain extent. Let's take a look at the specific features.
  1. It can be used both positive and negative The performance of forward and reverse is the same, and the oil inlet channel and the migration channel are symmetrical to each other. And the aperture is also the same, so that is to say, when using the gear motor, whether it is used in the positive or negative use, the effect is exactly the same, and there is no need to worry too much about which side is the front side and which side is the negative side.   2. Adopt external leakage oil holes Generally, the gear motor is used with external leakage oil holes, and there are two main reasons for the use of external leakage oil holes, the first aspect is that the gear motor has back pressure when returning oil, and the other aspect is because the gear motor will have some changes in the oil inlet and oil return cavity when it is used in the positive and negative use, although the positive and negative performance is the same, but this change will also cause problems when the gear motor is in use, so it is best to use the external leakage oil hole, which can protect the shaft end oil seal from being washed out.   3. Symmetry The main performance is the structure of the automatic compensation plate and the floating side plate for the inter-shaft clearance, because the entire gear motor is adapted to forward and reverse rotation. The performance is the same when working, so it is very necessary to say that the center of the whole gear motor is symmetrical, and at the same time, the trapped oil unloading groove must also be a symmetrical structure in the gear motor.   4. There are many rolling bearings used Rolling bearings are used more often because they can reduce friction and improve starting performance.