The parts to be inspected during the maintenance of the micro gear reducer Micro gear reducer is the best product in the geared motor, with a high technical content, it has the latest technical requirements to produce, micro geared motor not only saves space, reliable and durable, high overload capacity, but also has low energy consumption, superior performance, low vibration, low noise, high energy saving and other characteristics. The gears used in the geared motor products are precision machined to ensure the accuracy of positioning, and the various motors that constitute the gear processing configuration of the gear geared motor assembly form a collective integration to ensure the quality of the product. The power is from 0.1KW to 3.7KW, there are horizontal, vertical, biaxial type, orthogonal type, and can also be customized according to the needs of customers. First of all, you need to check the lubrication system of the motor, and check the quality of the lubricating oil 3~4 weeks before the inspection. If you want to know the exact indicators, you can take an oil sample and send it to the lubricant supplier for testing. Poor results in oil can affect the improper use of the motor, shine into blocked pipes or faulty heat exchangers. A good lubricant can be used for another year without a re-oil change, which also proves the need for regular motor inspections.
   The following are the parts to be inspected when checking the lubrication system: 1. Check the balance of lubricating oil in the oil tank to ensure sufficient oil volume, and check the seals to prevent leakage;   2. Check whether there are precipitated pollutants and foreign substances at the bottom of the fuel tank; 3. Check the heat exchanger to prevent leakage or blockage, and observe the oil temperature to identify whether the heat exchanger is cooling the lubricating oil correctly; 4. Check the pressure gauge, oil pump, fuel injector, oil injection hole, oil level indicator and filter and other lubrication devices to ensure normal operation; 5. If the observation hole of the reducer gearbox is large enough to see the bearing and the oil supply groove, the bearing and the oil supply groove should be checked to ensure that there is no debris blocking the oil circuit, and the lubricating oil can flow smoothly into the bearing; 6. The vent and filter should be installed correctly to ensure normal operation; 7. The universal joint and the condition of the frame should also be included in the inspection items. When inspecting the micro gear motor, the gear box of the gear motor should be opened. If this is not possible, it is also possible to simply open the observation hole. Wipe the surface of the gear teeth of the reducer and observe the condition of the recording surface. However, even if it is a very detailed record, it is difficult to distinguish the difference between this time and the next reducer tooth surface, if conditions permit, the use of color photos is the best way to record the surface changes.